
Hydrogen Sulphide (H2S) Awareness
Recognize where H2S can occur, understand its properties and health effects, use personal gas monitors correctly and respond safely to an H2S alarm, including escape and muster actions.
Understand how 4-gas detectors measure oxygen, flammable gases as LEL, H2S and carbon monoxide, carry out bump tests, take representative readings and act correctly on alarms.
Offered by Leaders Training Centre

These apply to the centre. See Key facts for this course's certificate.






By the end of this course, participants will be able to:
Gas Testing Awareness training in Doha, Qatar explains how atmospheric monitoring protects people before and during confined space entry, hot work and work on process equipment. Learners study the four gases most portable multi-gas detectors measure: oxygen, flammable gases expressed against the lower explosive limit (LEL), hydrogen sulphide and carbon monoxide, and how sensor types, cross-sensitivity and poisoning can affect readings.
Practical sessions show how to switch on and check a 4-gas detector, perform a bump test, understand calibration records, sample at different heights with a pump and probe, and record results on a gas test certificate. Scenario exercises practice interpreting readings and deciding whether work may proceed. The course can be run as an in-house program for an organization using its own detector models and gas testing procedures.
This course is for people who carry out or rely on gas tests before work begins.
Authorized gas testers in training
Confined space entrants and attendants
Permit issuers and supervisors
Hot work and maintenance crews
HSE officers and safety watchmen
Oxygen deficiency and enrichment
Flammable gases and vapors, LEL and UEL
Toxic gases: H2S, carbon monoxide and others
Gas density: where gases collect
Portable 4-gas detectors and single-gas monitors
Catalytic, infrared and electrochemical sensors
Sensor poisoning and cross-sensitivity
Fixed detection systems compared with portable units
Pre-use checks and fresh-air zeroing
Bump testing procedure and records
Calibration by competent persons
Taking a failed detector out of service
Sampling order: oxygen, flammables, then toxics
Sampling at top, middle and bottom levels
Interpreting readings and alarm responses
Gas test certificates and retest intervals
Qatar's gas processing plants, refineries, petrochemical complexes, utilities and underground services involve frequent confined space entry and hot work where accurate gas testing is a basic safeguard. Industrial areas such as Ras Laffan and Mesaieed, along with municipal sewage and drainage networks, all need workers who understand detectors and readings. This supports safety oversight by national authorities and the skilled, safety-conscious workforce sought by Qatar National Vision 2030.
Join a scheduled class at our training centre in Doha or attend live online. For organizations, the course can run as an in-house program at your premises or online, tailored to your sector, examples and schedule.
It is a practical course in Doha that explains hazardous atmospheres and how to use 4-gas detectors, including bump testing, LEL readings, sampling technique, alarm responses and recording gas test results before and during work.
People who test atmospheres or work under gas test results: confined space entrants and attendants, permit issuers, hot work crews, supervisors, safety watchmen and HSE officers in industrial and utility settings.
No. Authorized gas tester status is granted by your employer or site owner after their own training and assessment on specific equipment. This course provides the underlying knowledge but does not replace that authorization.
Yes. It can be delivered at your premises or online and tailored to your sector, detector models, gas testing procedures and schedule. Contact Leaders Training Centre to arrange an in-house gas testing session for your crews.
Tell us a little about yourself and an advisor will contact you about batch timings, fees and eligibility. No obligation.
Sat–Thu: 09:00–22:00Fri: 08:00–22:00

Recognize where H2S can occur, understand its properties and health effects, use personal gas monitors correctly and respond safely to an H2S alarm, including escape and muster actions.

Understand how a permit to work system controls high-risk tasks, the roles of issuer, receiver and authorizer, and how to prepare, use, suspend and close a permit correctly on site.

Understand hazardous area classification, ATEX and IECEx zones for gas and dust, equipment protection markings and how to control ignition sources when working in explosive atmospheres.

Plan and control hot work such as welding, cutting and grinding by applying hot work permits, gas testing before work, removal of combustibles, fire watch duties and safe post-work checks.
4.8
Based on 1,027 Google reviews