Plan work at height using the avoid, prevent, mitigate approach, choose suitable access equipment, inspect and wear a fall arrest harness correctly, and understand rescue planning.
The Working at Heights training in Doha, Qatar prepares workers and supervisors to plan and carry out work above ground level without falls. Falls from height are a leading cause of fatal injuries in construction and maintenance, and most can be prevented with sound planning. The course follows the recognized order of avoiding work at height where possible, preventing falls with collective protection such as guardrails, and minimizing the consequences with nets, airbags and personal fall arrest systems when risk remains.
Learners handle real equipment wherever possible, carrying out pre-use harness and lanyard inspections, checking ladders and discussing anchor point selection, clearance distances and continuous tie-off when moving between anchors. Case studies show how falls happen from ladders, mobile elevating work platforms, fragile surfaces and open edges. Suspension trauma and the need for a prompt, practiced rescue plan are covered in practical terms. Organizations can book the course as an in-house program using their own equipment and typical tasks.
By the end of this course, participants will be able to:
Explain why falls happen and apply the avoid, prevent, mitigate approach
Choose between guardrails, platforms, MEWPs, ladders and fall arrest systems
Inspect harnesses, lanyards and connectors before use and reject defective items
Select suitable anchor points and calculate basic fall clearance
Use ladders safely, maintaining three points of contact
Describe suspension trauma and the essentials of a work at height rescue plan
This training is designed for people who work at height or plan and supervise tasks above ground level.
Construction workers, steel fixers and installers
Maintenance and facilities technicians
MEP electricians, plumbers and HVAC technicians
Site supervisors and foremen planning work at height
HSE officers reviewing work at height permits
Why falls occur and typical fall scenarios
Avoid, prevent, mitigate as the planning sequence
Risk assessment and work at height permits
Weather, wind and heat considerations
Guardrails, toe boards and edge protection
Mobile elevating work platforms and their hazards
Mobile tower and scaffold access in brief
Safety nets and soft landing systems
When a ladder is a suitable choice
Pre-use checks and safe ladder angle
Three points of contact and overreaching
Securing, footing and storing ladders
Restraint versus fall arrest systems
Harness fitting, lanyards, energy absorbers and self-retracting lifelines
Anchor points, fall clearance and swing fall
Continuous tie-off with twin-leg lanyards
Suspension trauma and why rescue must be prompt
Elements of a work at height rescue plan
Rescue equipment and roles in an emergency
Reporting falls, near misses and dropped equipment
High-rise towers, stadium-scale structures, industrial plants and building maintenance across Qatar involve daily work at height, often in strong sun and gusting winds. Facade access, MEP installation and plant maintenance at sites such as Ras Laffan and Mesaieed all depend on reliable fall protection. Qatar's Ministry of Labour expects employers to control serious risks to workers, and competent planning of work at height is a core part of that duty and of a safe construction culture.
Join a scheduled class at our training center in Doha or attend live online. For organizations, the course can run as an in-house program at your premises or online, tailored to your sector, examples and schedule.
It is a practical working at heights training course in Doha, Qatar covering planning, access equipment, ladders, harnesses, anchor points, fall clearance and rescue. It helps workers and supervisors prevent falls and respond correctly if someone is suspended in a harness.
It suits construction workers, installers, maintenance and MEP technicians, supervisors who plan work above ground level, and HSE officers who review work at height permits and rescue plans.
No. It is a non-accredited awareness and skills course. It does not replace MEWP operator certification, formal harness inspector training or any competence assessment your employer or client requires. It does give you the knowledge to use fall protection correctly and recognize defects before use.
Yes. It can be delivered at your premises or online and tailored to your sector, using your own harnesses, access equipment, rescue arrangements and schedule. Contact Leaders Training Center to plan an in-house program.
Tell us a little about yourself and an advisor will contact you about batch timings, fees and eligibility. No obligation.
Sat–Thu: 09:00–22:00Fri: 08:00–22:00
Recognize the main hazards on a construction site, follow site rules and safe systems of work, and know how to report unsafe conditions and respond to emergencies from your first day.
Check that a scaffold is tagged and fit for use, recognize missing guardrails, boards and ties, use scaffolds and mobile towers safely, and report defects without altering the structure.
Recognize confined spaces and their specific hazards, understand atmospheric testing for oxygen, flammables and toxics, and follow entry permits, standby duties and rescue arrangements.
Plan and work around excavations safely by locating underground services, choosing protective systems such as sloping, benching, shoring and shielding, and controlling edges, access and plant.
